Data sheet and standard sizes
Manufactured to globally accepted standards including BS3575, DIN7338, ANSI B18.7 and JISD4312 or to customers specified drawings.
ANSI B18.7 (1972)
Dimensions for 150° Flat Countersunk Head Semi-Tubular Rivets
Recommended for attachment of friction material
| Rivet Reference | Normal Size | Shank Diameter | Head Diameter | Head Thickness | Tube Diameter at end of rivet | Tube Depth to start of apex |
| | B | C | D | J | K |
| | max. | min. | max. | min. | max. | min. | max. | min. | *reference |
| 4- | 0.146 | 0.146 | 0.141 | 0.303 | 0.289 | 0.045 | 0.035 | 0.105 | 0.099 | 0.141 |
| 7- | 0.188 | 0.188 | 0.182 | 0.367 | 0.351 | 0.051 | 0.041 | 0.139 | 0.133 | 0.188 |
| 10- | 0.252 | 0.252 | 0.244 | 0.478 | 0.458 | 0.067 | 0.053 | 0.183 | 0.173 | 0.250 |
All dimensions are in inches
Dimensions for 150° Large Flat Countersunk Head Semi-Tubular Rivets
Recommended for attachment of friction material
| Rivet Reference | Normal Size | Shank Diameter | Head Diameter | Head Thickness | Tube Diameter at end of rivet | Tube Depth to start of apex |
| | B | C | D | J | K |
| | max. | min. | max. | min. | max. | min. | max. | min. | *reference |
| 5- | 0.146 | 0.146 | 0.141 | 0.367 | 0.351 | 0.051 | 0.041 | 0.105 | 0.099 | 0.141 |
| 8- | 0.188 | 0.188 | 0.182 | 0.478 | 0.458 | 0.067 | 0.053 | 0.139 | 0.133 | 0.188
|
All dimensions are in inches
*These are reference dimensions only. Hole depths will vary depending upon the purpose for which a particular rivet is designed.
Rivet Designation Example:
The shank length (L) is specified by whole numbers of 1/16 inch increments.
Part number 8-10 is therefore rivet reference 8- with a shank length (L) of 5/8 inch (10 x 1/16 inch).